SPOOLOGIC Turbo Oil Feed & Drain Line Kit

The SPOOLOGIC Turbo Oil Feed & Drain Line Kit SL-350-001 supplies the oil-feed and return connections for turbocharger service on 2003–2007 Ford F-250 F-350 F-450 F-550 trucks with the 6.0L Powerstroke engine.

Features

• Supplies the oil-feed and return connections for turbocharger service
• Line components supplied together for service

What’s Included

• 1 SPOOLOGIC turbo oil feed line
• 1 SPOOLOGIC turbo oil drain line
• 1 turbo oil-feed flange gasket
• 1 oil-feed-line O-ring
• 2 oil-drain-line O-rings
• Mounting hardware

Fitment

• 2003-2007 Ford F-250 F-350 F-450 F-550 6.0L Powerstroke
• 2004-2010 Ford E-350 E-450 Econoline 6.0L Powerstroke
• 2003-2005 Ford Excursion 6.0L Powerstroke

⚠️ Some early-production 2003 6.0L Powerstroke engines require an updated oil filter base/adapter to install the supplied turbo oil feed line. Verify the existing feed-line connection and oil filter base before ordering. The required base/adapter is not included.

Installation Notes

Clean the oil-line connections and sealing surfaces before installation. Fit the supplied gasket and O-rings using the applicable Ford service procedures, and follow the specified bolt-tightening and turbocharger lubrication procedures. Check for oil leaks after installation. Correct any oil-supply restriction or contamination that contributed to the original turbocharger failure before operating the replacement turbo.

Replacement seals and mounting hardware are also available separately in the SPOOLOGIC Turbocharger Installation Kit — SL-310-131.

Replacement References

The following numbers identify the corresponding oil lines and sealing components, rather than a single Ford part number for the complete SPOOLOGIC kit.

• Ford Oil Feed Line: 3C3Z-9T516-A / 3C3Z9T516A
• Ford Oil Drain Line: 6C3Z-9T515-A / 6C3Z9T515A; 6C3Z-9T515-B / 6C3Z9T515B
• Ford Installation Kit: 3C3Z-9T514-AD / 3C3Z9T514AD; 3C3Z-9T514-AG / 3C3Z9T514AG
• Garrett Installation Kit: 726476-0006

1-Year Limited Warranty

Every SPOOLOGIC Turbo Oil Feed and Drain Line Kit carries a 1-Year Limited Warranty against defects in materials and workmanship for the original purchaser from the original purchase date. Coverage excludes damage caused by improper installation, contaminated or damaged connections, reused installation seals, and physical damage. Claims require dated proof of purchase. Contact SPOOLOGIC for return authorization before shipping the component for inspection. If inspection confirms a covered defect, SPOOLOGIC will replace the covered component. Customers pay warranty shipping in both directions; labor and related costs are not covered. See the SPOOLOGIC Warranty Policy for full terms.