SPOOLOGIC Stock Turbocharger

The SPOOLOGIC Stock V2S Compound Turbocharger Set SL-100-035 is a brand-new replacement package for 2008-2010 Ford F-250 F-350 F-450 F-550 trucks with the 6.4L Powerstroke. Designed to restore factory boost, throttle response, engine performance, drivability, and fuel economy, this matched set gets your truck back to daily driving, towing, and everyday work.

Features

• Brand new, no core charge
• Matched high-pressure and low-pressure compound turbocharger set
• Cast aluminum compressor wheels
• 11-blade high-pressure and 10-blade low-pressure turbines
• Upgraded journal bearings, 360° thrust bearings, and step-gap seal rings
• New high-pressure VGT unison ring and vanes
• High-speed VSR balanced

What's Included

SPOOLOGIC Stock Compound Turbocharger Set — SL-100-035:

• 1 SPOOLOGIC Stock High-Pressure Turbocharger — SL-100-032
• 1 SPOOLOGIC Stock Low-Pressure Turbocharger — SL-100-031
• 1 SPOOLOGIC Turbo Mounting Gasket Set — SL-310-141

Electronic actuator is not included.

Fitment

• 2008-2010 Ford F-250 F-350 F-450 F-550 6.4L Powerstroke

Compound Turbo System

The factory compound system uses two turbochargers in sequence. Intake air passes through the larger low-pressure compressor, then the smaller high-pressure compressor before reaching the intercooler. Exhaust drives the high-pressure VGT turbine first, then the low-pressure turbine.

If only one stage needs replacement, see the Stock high-pressure SL-100-032 or Stock low-pressure SL-100-031. For a matched billet-compressor upgrade, compare the Stock Plus compound set SL-100-036.

Low-Pressure Compressor Wheel

• Blade design: 7+7
• Compressor inducer: 64.5 mm
• Compressor exducer: 88 mm
• Material: Cast aluminum

High-Pressure Compressor Wheel

• Blade design: 7+7
• Compressor inducer: 51.8 mm
• Compressor exducer: 74.1 mm
• Material: Cast aluminum

Low-Pressure Turbine Shaft

• Turbine inducer: 79.6 mm
• Turbine exducer: 73.2 mm
• Turbine blade count: 10
• Material: High-nickel Inconel

High-Pressure Turbine Shaft

• Turbine inducer: 69.9 mm
• Turbine exducer: 62.7 mm
• Turbine blade count: 11
• Material: High-nickel Inconel

Upgraded Internals

• Upgraded journal bearings
• 360° thrust bearings
• Step-gap seal rings

High-Speed VSR Balancing

The rotating assembly is high-speed VSR balanced before shipment for smooth, consistent operation.

VGT Control System

The high-pressure turbocharger uses variable turbine geometry with a new unison ring and vanes. The electronic actuator is not included; reuse a serviceable actuator or obtain the correct replacement.

⚠️ Follow the actuator manufacturer’s installation instructions.

OEM Cross-References

Complete Compound Assembly References

• BorgWarner: 176013 / 179514 / 476013 / 479514 / 12709901039 / 1270 990 1039
• Ford: 8C3Z-6K682-CRM / 8C3Z6K682CRM
• Ford: 8C3Z-6K682-ERM / 8C3Z6K682ERM
• Motorcraft: TC-16-RM / TC16RM
• Motorcraft: TC-18-RM / TC18RM

High-Pressure Turbocharger References

• BorgWarner: 176466 / 179515 / 476466 / 479515
• Ford: 8C3Z-6K682-B / 8C3Z6K682B
• Ford: 8C3Z-6K682-BARM / 8C3Z6K682BARM
• Ford: 8C3Z-6K682-DARM / 8C3Z6K682DARM
• Ford: 8C3Z-6K682-FRM / 8C3Z6K682FRM
• Motorcraft: TC-14-RM / TC14RM

Low-Pressure Turbocharger References

• BorgWarner: 177100 / 179523 / 477100 / 479523
• Ford: 8C3Z-6K682-A / 8C3Z6K682A
• Ford: 8C3Z-6K682-AA / 8C3Z6K682AA
• Ford: 8C3Z-6K682-AARM / 8C3Z6K682AARM
• Motorcraft: TC-11-RM / TC11RM

1-Year Limited Warranty

Every SPOOLOGIC turbocharger carries a one-year limited warranty against defects in materials and workmanship from the original purchase date. Coverage applies to the original purchaser with dated proof of purchase. Contact SPOOLOGIC for return authorization before shipping the turbocharger for inspection. If inspection confirms a covered defect, SPOOLOGIC will repair or replace the turbocharger at its discretion. Coverage excludes damage caused by foreign-object debris, oil starvation, contaminated or restricted oil supply or drainage, extended oil-change intervals, overboosting, overspeed, overfueling, excessive exhaust temperatures, improper installation or startup, improper tuning or repairs, or operation outside the listed application or intended operating range. Normal cosmetic wear, coating discoloration, and heat-cycling marks are not covered. Customers pay shipping to SPOOLOGIC and return shipping, whether the claim is approved or denied. Labor, diagnostics, removal, reinstallation, towing, downtime, and other related expenses are not covered. See the SPOOLOGIC Warranty Policy for complete terms and claim procedures.