SPOOLOGIC Manifold Absolute Pressure (MAP) Sensor Harness

The SPOOLOGIC Manifold Absolute Pressure Sensor Harness SL-600-062 replaces the connector-to-connector MAP adapter on the listed 2000-2002 Dodge Ram 2500 3500 5.9L Cummins 24V applications, connecting the matching sensor to the engine wiring.

Features

• Connector-to-connector MAP sensor harness
• Connects matching sensor and engine-harness plugs
• Sensor sold separately

What's Included

• 1 SPOOLOGIC Manifold Absolute Pressure Sensor Harness - SL-600-062

Fitment

• 2000-2002 Dodge Ram 2500 3500 5.9L Cummins 24V

Harness Compatibility

Compare both connector ends with the installed sensor and engine wiring. Do not assume all 1998.5-2002 Cummins MAP sensor combinations interchange.

Related Fault Codes

• P0237: Boost-pressure sensor circuit low input.
• P0238: Boost-pressure sensor circuit high input.
• P0236: MAP pressure too high for too long; boost-control performance fault.

Code availability and definitions vary by model year and calibration. Fault codes identify a condition to diagnose and do not confirm component failure. Check wiring, connectors, and related systems before replacement.

Diagnosis Before Replacement

For P0236, check actual boost and wastegate operation. Inspect connector locks, terminal contact, seals, and harness continuity. Determine whether the fault is in this adapter, the main engine wiring, or the sensor before replacement.

Installation Notes

Switch the ignition off, match both plugs, and engage the connector locks fully. Secure the harness away from heat and abrasion, then verify stable MAP feedback.

OEM Cross-References

• Cummins: 3104228

1-Year Limited Warranty — No Returns

Every SPOOLOGIC Manifold Absolute Pressure MAP Sensor Harness carries a 1-Year Limited Warranty against defects in materials and workmanship for the original purchaser from the original purchase date. Electrical harnesses are non-returnable; eligible warranty claims remain covered. Coverage excludes damage caused by incorrect wiring, physical damage, or improper installation or misuse, including resulting water intrusion. Claims require dated proof of purchase. Contact SPOOLOGIC for return authorization before shipping the component for inspection. If inspection confirms a covered defect, SPOOLOGIC will replace the covered component. Customers pay warranty shipping in both directions; labor and related costs are not covered. See the SPOOLOGIC Warranty Policy for full terms.